Flash
fluorescent lighting for popup  displays
technical information and
handling
The
lighting fixtures are 50cm long with an electrical consumption of 18 watt
(220 volt). These light
sticks are compactly built and protected by a cover. The weight of a
complete Light stick is 280 grams with a diameter of 12.5 mm. With every
light stick a mounting bracket is also included. This mounting bracket
snaps in to the sides of the Expofix, Prestige, Expostar, Promofix and Towerfix structures. This
mounting bracket can be adjusted length wise or rotate 360°. The light
sticks emit a light temperature of 5400 Kelvin. The graphic colours are
neutrally rendered and not adversely influenced by the light medium.
 Software
The other important element in the Flash system is the software
(graphic panels). Several tests have shown us that there are various possibilities to produce transparent panels. We will describe herewith different methods of production. Prior to using new materials, testing is recommended. Materials have different thickness' or various inks for Encad digital printers (ink. Jet) behave differently with temperature or other parameters changes and can adversely influence the end result. Adverse end results are mostly predominant when using hot lamination
 Production recommendations:
Photo application:
Transmission of image on Dia Duratrans material
Cold encapsulation using self adhesive foil on 500m transparent PVC Foil.
Lambda application:
Transmission of image on Dia Duratrans material
Cold encapsulation using self adhesive foil on 500m transparent PVC Foil.
Endcad Digital printing:
Print on Backlite or Translite material
Cold encapsulation using self adhesive foil on 500m transparent PVC Foil.
Or
Print on Backlite or Translite material
Hot encapsulation using rigid 250m transparent Polyester foil on both sides.
Raster graphic digital printing:
Print on Backlite or Translite material
Hot encapsulation using rigid 250m transparent Polyester foil on both sides.
It is important to note, when using back lit systems, the graphics are usually on the front side of the display system and the back side of the system serves as a reflection
surface. This reflection surface can be done using normal white PVC Prestige panels. If these panels are not installed to much light will be lost and the graphic effect will not be so prevalent.
|
