	EXPO DISPLAY SERVICE LIMITED UK

Ultima Excaliber - Original Banner 3 Twin

Previously known as the Excaliber 2 old style banner, the Original Banner 3 Twin is a popular and versatile banner ideal for exhibition or showroom graphic display. It can be used as a single or double-sided unit

Visible banner size is 2145mm high with a choice of 600mm, 800mm, 1000mm, 1200mm, 1500mm or 2000 widths.

Available in black or light grey powdercoated or silver Anodised finishes

Weight approx 8.5kg.

The Original 3 twin banner stand is supplied complete with a carry bag and a premium digitally printed graphic panel, and is normally delivered within 4-5 days from receipt of order and graphic approval.

Expo use premium quality printed graphic panels with a matt laminate seal for all roller banner stands.

Our graphic banners are durable and stay scuff free and do not curl at the edges like cheaper alternatives.

clip on spot light Original Banner 3 Twin foot Original Excaliber banner stand rear

The Original Excaliber banner stand can be ordered up to 2 metres wide so it has a deeper footprint for extra stability. It is a double sided banner stand although it can be used as a single banner system.

Original Excaliber Twin rollup banner stand setup

Put the system on level ground and insert the 3 part bungee pole through the hole on the base. Place the doubler into the top of the pole before lifting the banner holding the top rail until the image is fully visible. Leaning the stand backwards will help you to reach the top of the pole. Secure the rail onto the doubler at the top of the pole then repeat for the other graphic.

setting up the orginal banner 3 twin

Always take care when lowering the panel to prevent damage to the graphic (do not drop).

Call for more details on the Original Excaliber Twin rollup banner 01908 263656